Conrad Kacsik Blog

Third-Party Pyrometry Service Providers Need ISO/IEC 17025 Accreditation

Jul 9, 2020 7:00:00 AM / by Jason Schulze

AMS2750F now states that third party pyrometry service providers must have a quality system that is ISO/IEC 17025 accredited from an ILAC (International Laboratory Accreditation Corporation) recognized regional cooperation body by June 2022. This accreditation will apply to the laboratory standards and/or field service as applicable.

Conrad Kacsik Instrument Systems, Inc. has been ISO/IEC 17025 approved for over 20 years. Our scope is extensive and includes thermocouple calibration to ASTM E220, secondary standard and field test instrument calibration, SAT and TUS service to AMS2750. We offer Nadcap and AMS2750 Revision F training courses that are particularly helpful for suppliers doing continuous improvement training, which is required by both ISO and Nadcap.

Conrad Kacsik’s full ISO/IEC scope of approval can be found at https://www.kacsik.com/about-us/certifications.

Español

AMS2750F ahora establece que antes del mes de junio del año 2022  los proveedores externos de servicios de pirometría deben contar con un sistema de calidad de acuerdo con  ISO/IEC 17025 aprobado por un organismo de acreditación de la Cooperación Internacional de Acreditación de Laboratorios (ILAC por sus siglas en inglés). Esta acreditación aplicará a los estandares del laboratorio y/o a los servicios externos, según corresponda.

Conrad Kacsik Instrument Systems, Inc. está acreditado por ISO/IEC 17025 desde hace más de 20 años. Nuestro alcance es extenso e incluye calibración de termopares según ASTM E220, estándares secundarios y calibración de instrumentos de pruebas de campo, y servicios de SAT y TUS según AMS2750.

 

 

Topics: AMS2750, Pyrometry

Jason Schulze

Written by Jason Schulze

Jason Schulze is a metallurgical engineer at Conrad Kacsik with over 20 years experience in the aerospace industry. He has been exposed to Nadcap in multiple commodities, although he often focuses on heat treat. Jason works with companies to insource and improve metallurgical processes, perform gap analysis and internal audits as well as gain Nadcap approval. He is a voting member of the Aerospace Metals and Engineering Committee (AMEC) B & D which provides the aerospace industry with the technical benefits that accrue from the ideas and experience of its members. Additionally, Jason is contracted by PRI as a PRI Training (formerly eQuaLearn) Instructor and teaches multiple courses, including pyrometry. He also writes articles for Heat Treat Today and Thermal Processing on specific subjects related to Nadcap heat treat audits and pyrometry.

Crucial Attributes Your Instrumentation Partner Must Have